What are the standard procedures for using pipe welding machines?

1. Avoid contact with the mold during operation.

2. Before using the welding pipe equipment, check that all lubricants on the unit are fully lubricated.

3. Daily maintenance is essential to ensure a long service life.

For a welder unit to be well maintained, rust prevention is essential. First, avoid placing the welder unit in a damp location. Furthermore, in addition to rust prevention, strict adherence is essential.

Operating the welder unit should strictly follow routine operating procedures. When applying lubrication, lubricate the slides and apply lubricant to the machine. The lubricant must be clean and free of impurities.

Regularly replace the lubricant in the welder unit's bearings and frequently inspect the electrical components to eliminate unreliable safety factors. Check the welder unit's V-belt, handle, knob, and button for damage.

Specific welding procedures are:

1. After the circuit board is correctly positioned, insert the left and right cones of the opener into the steel coil and rotate them simultaneously. Place the wire into the ejection roller, press the roller against the ejection roller, and return the steel trolley and magnetic roller to their original positions.

To ensure precise handling of the spring steel strip, the strip is adjusted to a maximum of 150mm throughout its entire axial motion. After opening, the strip passes through clamping rollers and reaches a straightening machine.

3. The straightened spring steel strip is cut using sliding hydraulic shears to cut the head and tail. The head is collected in a scrap box, while the tail can be collected online in a dedicated external collector.